Customization: | Available |
---|---|
After-sales Service: | Online Technical Support |
Warranty: | 15 Years |
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
PRODUCT SPECIFICATION | ||||||||||||||||||
Item | Standard | Requirements | Result | |||||||||||||||
Slip Resistance Dry | EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007 | Pendulum value≥36 | Longtitudinal direction:Mean 72,Min 70 Horizontal direction:Mean 79,Min 78 | |||||||||||||||
EN 15534-4:2014 Section 4.4 | ||||||||||||||||||
Slip Resistance Wet | EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007 | Pendulum value≥36 | Longtitudinal direction:Mean 46,Min 44 Horizontal direction:Mean 55,Min 53 | |||||||||||||||
EN 15534-4:2014 Section 4.4 | ||||||||||||||||||
Falling mass impact resistance | EN 15534-1:2014 Section7.1.2.1 | None of the speciments shall a failure with a crack length≥10mm or a depth of residual indentation≥0.5mm | Max.Crack length(mm):No crack Max.Residual indenation(mm):0.31 | |||||||||||||||
EN 15534-4:2014 Section 4.5.1 | ||||||||||||||||||
Flexural properties | EN15534-1:2014 AnnexA | -F'max:Mean≥3300N,Min≥3000N -Deflection under a load of 500N Mean≤2.0mm,Max≤2.5mm |
Bending Strength:27.4 MPa Modulus of elasiticity:3969 MPa Maximum load: Mean 3786N,Min 3540N Deflection at 500N: Mean:0.86mm,Max:0.99mm |
|||||||||||||||
EN 15534-4:2014 Section 4.5.2 | ||||||||||||||||||
Creep behaviour | EN 15534-1:2014 Section7.4.1 | Known span in use: Mean S≤10mm,Max S≤13mm, Mean Sr≤5mm |
Span: 330mm,Mean S 1.65mm,Max S 1.72mm,Mean Sr 1.27mm | |||||||||||||||
EN 15534-4:2014 Section 4.5.3 | ||||||||||||||||||
Swelling and water absorption | EN 15534-1:2014 Section8.3.1 | Mean Swelling:≤4% in thickness,≤0.8% in width,≤0.4% in length Max swelling:≤5% in thickness, ≤1.2% in width,≤0.6% in length Water absorption: Mean:≤7%,Max:≤9% |
Mean Swelling:1.81% in thickness,0.22% in width,0.36% in length Max Swelling:2.36% in thickness,0.23% in width,0.44% in length Water absorption:Mean:4.32%,Max:5.06% |
|||||||||||||||
EN 15534-4:2014 Section 4.5.5 | ||||||||||||||||||
Boiling Test | EN 15534-1:2014 Section8.3.3 | Water absorption in weight: Mean≤7%,Max≤9% | Water absorption:Mean:4.32%,Max:5.07% | |||||||||||||||
EN 15534-4:2014 Section 4.5.5 | ||||||||||||||||||
Linear thermal expansion coefficient | EN 15534-1:2014 Section9.2 | ≤50×10 K¹ | 34.2 x10 K¹ | |||||||||||||||
EN 15534-4:2014 Section 4.5.6 ISO 11359-2:1999 | ||||||||||||||||||
Resistance to indentation | EN 15534-1:2014 Section7.5 | Brinell hardness: 79 MPa Rate of elastic recovery:65% |
||||||||||||||||
EN 15534-4:2014 Section 4.5.7 | ||||||||||||||||||
Heat reversion | EN 15534-1:2014 Section9.3 | Test Temperature:100ºC Mean: 0.09% |
||||||||||||||||
EN 15534-4:2014 Section 4.5.7 EN 479:2018 |